Search Results

The main purpose of this research is to investigate the optimal design of pipeline diameter in an air brake system in order to reduce the response time for driving safety using DOE (Design of Experiment) method. To achieve this purpose, this paper presents the development and validation of a computer-aided analytical dynamic model of a pneumatic brake system in commercial vehicles. The brake system includes the subsystems for brake pedal, treadle valve, quick release valve, load sensing proportional valve and brake chamber, and the simulation models for individual components of the brake system are established within the multi-domain physical modeling software- AMESim based on the logic structure. An experimental test bench was set up by connecting each component with the nylon pipelines based on the actual layout of the 4×2 commercial vehicle air brake system.

Advanced driver assistance systems like cooperative adaptive cruise control (CACC) are designed to exploit information provided by vehicle-to-vehicle (V2V) and/or infrastructure-to-vehicle (I2V) communication systems to achieve desired objectives such as safety, traffic fluidity or fuel economy. In a day to day traffic scenario, the presence of unknown disturbances complicates achieving these objectives. In particular, CACC benefits in terms of fuel economy require the prediction of the behavior of a preceding vehicle during a finite time horizon. This paper suggests an estimation method based on actual and past inter-vehicle distance data as well as on traffic and upcoming traffic lights. This information is used to train a set of nonlinear, autoregressive (NARX) models. Two scenarios are investigated, one of them assumes a V2V communication with the predecessor, the other uses only data acquired by on-board vehicle sensors.

Towards developing of advanced driver specific active/passive safety systems it is important to be able to continuously evaluate driving performance variations. These variations are best captured when evaluated against similar driving patterns or maneuvers. Hence, accurate maneuver recognition in the preliminary stage is vital for the evaluation of driving performance. Rather than using simulated or fixed test track data, it is important to collect and analyze on-road real-traffic naturalistic driving data to account for all possible driving variations in different maneuvers. Towards this, massive free style naturalistic driving data corpora are being collected. Human transcription of these massive corpora is not only a tedious task, but also subjective and hence prone to errors/inconsistencies which can be due to multiple transcribers as well as lack of enough training/instructions.

The last years have seen an increasing amount of innovations in the functionality of car electronics (e.g. advanced driver assistant systems (ADAS) and in-vehicle infotainment systems (IVIS)). These electrical systems are not reserved for premium cars anymore, but additionally reach mid-size, compact, and subcompact cars. The growing number of functionalities in these cars entails increasing amount of interfaces, which may confuse, overload, or annoy the driver. Accompanying this, there is a trend towards the integration of capacitive touchscreens as user interfaces. These touchscreens were implemented first in consumer electronics and had a substantial impact on the way in which users interact with technology. This in turn has led to an increased user driven demand for the technology to be implemented in other domains, even in safety-critical ones like the automotive area.

Proper operation of an internal combustion engine is required by demands of a vehicle driver and governmental legislations. Therefore it is necessary to monitor, within an online technique, the engine and detect any fault which disrupts its normal operation. In this paper, the air-charge path, as a key element in a turbocharged engine, is monitored for an air leakage fault. At first, a robust algorithm to estimate unmeasured turbocharger rotational speed is presented. The sliding mode methodology is used to design the estimator which is shown to be robust to the compressor modeling uncertainties. The estimation error from the sliding mode observer (SMO) is then used to detect abnormal behavior of the turbocharger along with the engine due to a leakage fault in the air-charge path. Experimental results from a modern turbocharged SI engine indicate the designed monitoring technique is able to detect a leakage fault, of 7 mm or higher sizes, in the air-charge path.

In this paper, we propose algorithms for cost minimization of physical wires that are used to connect electronic devices in the vehicle. The wiring cost is one of the most important drivers of electrical architecture selection. Our algorithms perform wire routing from a source device to a destination device through harnesses, by selecting the optimized wire size. In addition, we provide optimized splice allocation with limited constraints. Based on the algorithms, we develop a tool which is integrated into an off-the-shelf optimization and workflow system-level design tool. The algorithms and the tool provide an efficient, flexible, scalable, and maintainable approach for cost analysis and architecture selection.

This paper presents the most recent advancement in the vehicle development process using the one-step or auto Transfer Path Analysis (TPA) in conjunction with the superelement, component mode synthesis, and automated multi-level substructuring techniques. The goal is to identify the possible ways of energy transfer from the various sources of excitation through numerous interfaces to given target locations. The full vehicle model, consists of superelements, has been validated with the detailed system model for all loadcases. The forces/loads can be from rotating components, powertrain, transfer case, chain drives, pumps, prop-shaft, differential, tire-wheel unbalance, road input, etc., and the receiver can be at driver/passenger ears, steering column/wheel, seats, etc. The traditional TPA involves two solver runs, and can be fairly complex to setup in order to ensure that the results from the two runs are consistent with subcases properly labeled as input to the TPA utility.

Polymeric foams are known to be sensitive to strain rate under dynamic loads. Mechanical characterization of such materials would not thus be complete without capturing the effect of strain rate on their stress-strain behaviors. Consistent data on the dynamic behavior of foam is also necessary for designing energy-absorbing countermeasures based on foam such as for vehicle occupant safety protection. Strain rates of the order of 100-500 s−1 are quite common in such design applications; strain rates of this range cannot be obtained with an ordinary UTM (universal testing machine) and a special test set-up is usually needed. In the current study, a unique approach has been suggested according to which quasi-static tests at low strain rates and low velocity drop tests at medium strain rates are utilized to arrive at an empirical relation between initial peak stress and logarithm of strain rate for a rigid closed-cell PU foam.

On-road, a vehicle experiences unsteady flow conditions due to turbulence in the natural wind, moving through the unsteady wakes of other road vehicles and travelling through the stationary wakes generated by roadside obstacles. Separated flow structures in the sideglass region of a vehicle are particularly sensitive to unsteadiness in the onset flow. These regions are also areas where strong aeroacoustic effects can exist, in a region close to the passengers of a vehicle. The resulting aeroacoustic response to unsteadiness can lead to fluctuations and modulation at frequencies that a passenger is particularly sensitive towards. Results presented by this paper combine on-road measurement campaigns using instrumented vehicles in a range of different wind environments and aeroacoustic wind tunnel tests.

Due to the diversity of Heavy Duty Vehicles (HDV), the European CO2 and fuel consumption monitoring methodology for HDVs will be based on a combination of component testing and vehicle simulation. In this context, one of the key input parameters that need to be accurately defined for achieving a representative and accurate fuel consumption simulation is the vehicle's aerodynamic drag. A highly repeatable, accurate and sensitive measurement methodology was needed, in order to capture small differences in the aerodynamic characteristics of different vehicle bodies. A measurement methodology is proposed which is based on constant speed measurements on a test track, the use of torque measurement systems and wind speed measurement. In order to support the development and evaluation of the proposed approach, a series of experiments were conducted on 2 different trucks, a Daimler 40 ton truck with a semi-trailer and a DAF 18 ton rigid truck.

This paper reviews fuel-saving technologies for commercial trailers, provides an overview of the trailer market in the U.S., and explores options for policy measures at the federal level that can promote the development and deployment of trailers with improved efficiency. For trailer aerodynamics, there are many technologies that exist and are in development to target each of the three primary areas where drag occurs: 1) the tractor-trailer gap, 2) the side and underbody of the trailer, and 3) the rear end of the trailer. In addition, there are tire technologies and weight reduction opportunities for trailers, which can lead to reduced rolling resistance and inertial loss. As with the commercial vehicle sector, the trailer market is diverse, and there are a variety of sizes and configurations that are employed to meet a wide range of freight demands.

NVH quality is one of the most important criteria by which people judge the design of a vehicle. The Powertrain Mounting System (PMS), which can reduce the vibration from engine to vehicle cab as well as the inside noise, has attained significant attention. Much research has been done on the isolation method for three- and four-point mounting. But the six-point mounting system, which is usually equipped in commercial vehicle, is seldom studied and should be paid more attention. In this paper, the support rod installed on the upside of the transmission case is considered as a flexible body. Thus a rigid-flexible coupling model of PMS is established and the necessity of the established model is analyzed by comparing the simulation results of the new model and those of the conventional model.

This paper includes analysis results for the control strategy of the Peugeot 3008 Hybrid4, a diesel-electric hybrid vehicle, under different thermal conditions. The analysis was based on testing results obtained under the different thermal conditions in the Advanced Powertrain Research Facility (APRF) at Argonne National Laboratory (ANL). The objectives were to determine the principal concepts of the control strategy for the vehicle at a supervisory level, and to understand the overall system behavior based on the concepts. Control principles for complex systems are generally designed to maximize the performance, and it is a serious challenge to determine these principles without detailed information about the systems. By analyzing the test results obtained in various driving conditions with the Peugeot 3008 Hybrid4, we tried to figure out the supervisory control strategy.

In order to determine the overall fuel economy of a plug-in hybrid electric vehicle (PHEV), the amount of operation in charge depleting (CD) versus charge sustaining modes must be determined. Mode of operation is predominantly dependent on customer usage of the vehicle and is therefore highly variable. The utility factor (UF) concept was developed to quantify the distance a group of vehicles has traveled or may travel in CD mode. SAE J2841 presents a UF calculation method based on data collected from travel surveys of conventional vehicles. UF estimates have been used in a variety of areas, including the calculation of window sticker fuel economy, policy decisions, and vehicle design determination. The EV Project, a plug-in electric vehicle charging infrastructure demonstration being conducted across the United States, provides the opportunity to determine the real-world UF of a large group of privately owned Chevrolet Volt extended range electric vehicles.

The switched reluctance motor (SRM) driver is receiving increasing attention from various researchers as well as industry as a viable for adjustable speed and servo applications. Combining the unique features of an SRM with simple and efficient power converter that in use, a superior motor drive system emerges which may be preferable for many applications compared to other AC or DC motor driver systems. Although a number of converters have emerged over the years for SRM drives, but every single driver has its own advantages and drawbacks and there has always been a trade-off between gaining something of the advantages and losing some when a new driver is offered.

The noise radiated by an electrical motor is very different from the one generated by an internal combustion engine. It is characterized by the emergence of high frequency pure tones that can be annoying and badly perceived by future drivers, even if the overall noise level is lower than that of a combustion engine. A simulation methodology has been proposed, consisting in a multi-physical approach to simulate the dynamic forces and noise radiated by electric motors. The principle is first to calculate the excitation due to electromagnetic phenomena (Maxwell forces) using an electromagnetic finite element solver. This excitation is then projected onto the structure mesh of the stator in order to calculate the dynamic response. Finally, the radiated sound power is calculated with the aid of a standard acoustic finite element method. The calculation methodology assumes a weak coupling between the different physical levels. It has been validated by comparison with the experiment.

The driving comfort is an important factor for buying decisions. Especially for battery electric vehicles (BEV) the acoustic quality is an elementary distinguishing feature, since the masking of an internal combustion engine (ICE) is no longer present. Opposing the importance of the acoustic quality is the lack of knowledge of how to measure and interpret the high frequency noise generated by an electric powertrain with respect to the NVH behavior influencing the passengers [1, 2]. In this contribution a method for measuring and interpreting the transfer path of acoustic phenomena from the drivetrain of a battery electric vehicle into the passenger cabin is presented. Due to the lack of masking by the ICE in case of BEV, high frequency phenomena must be considered as well. In order to determine the airborne transfer function from the electric powertrain to the driver cabin, a dodecahedral speaker is used for reciprocal measurements.

This study was designed to investigate how the spectral power distribution (SPD) of LED headlamps (including correlated color temperature, CCT) affects both objective driving performance and subjective responses of drivers. The results of this study are not intended to be the only considerations used in choosing SPD, but rather to be used along with results on how SPD affects other considerations, including visibility and glare. Twenty-five subjects each drove 5 different headlamps on each of 5 experimental vehicles. Subjects included both males and females, in older (64 to 85) and younger (20 to 32) groups. The 5 headlamps included current tungsten-halogen (TH) and high-intensity discharge (HID) lamps, along with three experimental LED lamps, with CCTs of approximately 4500, 5500, and 6500 K. Driving was done at night on public roads, over a 21.5-km route that was selected to include a variety of road types.

When employing in-car active sound generation (ASG) and active noise cancellation (ANC), the accurate knowledge of the vehicle interior sound pressure distribution in magnitude as well as phase is paramount. Revisiting the ANC concept, relevant boundary conditions in spatial sound fields will be addressed. Moreover, within this study the controllability and observability requirements in case of ASG and ANC were examined in detail. This investigation focuses on sound pressure measurements using a 24 channel microphone array at different heights near the head of the driver. A shaker at the firewall and four loudspeakers of an ordinary in-car sound system have been investigated in order to compare their sound fields. Measurements have been done for different numbers of passengers, with and without a dummy head and real person on the driver seat. Transfer functions have been determined with a log-swept sine technique.

The number of elderly drivers is increasing in Japan and ensuring the safety of elderly drivers is becoming an important issue. The authors previously conducted an analysis of the characteristics of accidents and traffic violations by elderly drivers based on the number of accidents in which they were rear-ended. This method was used in order to exclude the influence of driving frequency. As a result of that analysis, it was found that the likelihood of violations committed by elderly drivers was not particularly higher than in other age groups, while the likelihood of accidents caused by them was higher. The risk of causing an accident was judged to be about two times higher in elderly drivers than in the 35-44 year age group. However, the methodology presupposed that collisions in which a driver is rear-ended are accidents that occur randomly, and that they occur with the same probability in each age group.